Overview
The VisionRGB-E1S has a single video capture device supporting up to 1920 x 1080 DVI or 2048 x 1536 analog resolution. The VisionRGB-E1S captures the analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.¦When a Datapath graphics card is used, the VisionRGB-E1S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilizes the hardware and dramatically increases performance. When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1S sends the data to system memory or direct to the graphics card, dependant on the software used for display. The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time.
  • Single channel RGB/DVI/HD video capture card
  • Four Lane PCI Express interface with a maximum data rate of 650 MB/sec
  • Maximum analog RGB video capture resolution of 2048 x 1536 x 24 bit
  • Maximum DVI capture resolution of 1920 x 1200 x 24 bit
  • On card processor for real time mode and sync detection
  • Support for multiple capture cards allowing up to 32 capture channels
  • High quality down scaling
  • Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats
  • High performance DMA to system memory or direct to graphics memory with scatter gather
  • VisionRGB-E1S is also optimized for operation with the Datapath range of graphics cards