Overview
The VisionRGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650 MB/s transfer bus bandwidth providing a further improvement to the 480 MB/s of the VisionRGB-E2. The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.¦When a Datapath graphics card is used, the VisionRGB-E2S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S capture card sends the relevant portions of each channel to use its graphics engine to render the data. This fully utilizes the hardware and dramatically increases performance.¦When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
  • High performance DMA to system memory or direct to graphics memory with scatter gatherClick to enlarge
  • On board processor for real time mode and sync detection
  • When used with the Datapath range of graphics card adapters, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance
  • Dynamic input source selection
  • Administrator mode
  • Update indicator